Common Washer Error Codes and How to Fix Them

Washer error codes can be confusing, but they are actually helpful indicators of what’s going wrong inside your appliance. Below, we break down the most common washer error codes and what you can try before calling a technician.

1. Error Code E1 — Water Supply Issue

What it means:
The washer is not getting enough water or the water flow is too slow.

How to fix:
• Check if the water taps are fully open.
• Inspect hoses for kinks or blockages.
• Clean the inlet filters.
• Make sure water pressure in your home is adequate.

2. Error Code E2 — Drain Problem

What it means:
The washer cannot drain water properly.

How to fix:
• Clean the drain filter (often located at the bottom front).
• Make sure the drain hose is not clogged or bent.
• Ensure the drain pump is functioning.

3. Error Code E3 — Unbalanced Load

What it means:
Clothes are unevenly distributed inside the drum.

How to fix:
• Open the washer and redistribute the laundry evenly.
• Remove heavy items and wash them separately.
• Avoid overloading the drum.

4. Error Code E4 — Door Not Locked

What it means:
The washer’s door is not closing or locking properly.

How to fix:
• Ensure the door is shut firmly.
• Inspect the rubber gasket for obstructions.
• Check the door lock mechanism for wear or damage.

5. Error Code E5 — Heating Issue

What it means:
The washer cannot heat the water to the required level.

How to fix:
• Reset the washer and try a different cycle.
• Check for low voltage in your home.
• A faulty heating element may need replacement.

6. Error Code E6 — Motor Malfunction

What it means:
There is a problem with the motor or its wiring.

How to fix:
• Power off the washer for 10–15 minutes.
• Restart and check if the error clears.
• If not, the motor or control board may require service.

When to Call for Professional Washer Repair

Need a check-up? Call Star Appliance Repair at (647)-847-8774 today!

Our appliance repair experts can diagnose and fix any washer issue quickly and safely.