Electrolux Dryer Error E64: What It Means & How to Fix It
Quick answer: E64 on an Electrolux dryer points to a fault in the heater circuit — the control board isn’t seeing the heating element respond correctly, most often because the element itself has failed or a relay controlling it is stuck.
“Dryer was running but everything came out cold, then E64 showed up on the display. Igor found a break in the heating element itself, replaced it, and checked the vent while he was in there too.”
Quick Answer
Electrolux (and shared-platform Frigidaire) dryers monitor the heating circuit to confirm it’s actually producing heat when commanded to. E64 means that confirmation failed — clothes may still tumble and the drum still turns, but with reduced or no heat, which is often the first symptom people notice before the code even appears.
What Does E64 Mean?
A heating element that’s broken internally (visible as a break somewhere along its coiled length) is the most common cause. A relay on the control board stuck open, or a thermal fuse that’s blown as a safety response to overheating, are the other frequent causes worth checking.
4 Steps to Diagnose E64
Power off the dryer at the outlet or breaker.
Let it sit for a minute before opening it up.
Locate and visually inspect the heating element.
Look for any visible break or separation along the coil — location varies by model, check your service diagram.
Test the thermal fuse for continuity.
A blown thermal fuse (common if the element overheated) reads as an open circuit and needs replacement.
Have the control board relay tested if the element and fuse both check out.
A relay fault needs a technician’s diagnosis behind the control panel.
Can You Fix This Yourself?
Visually inspecting the heating element and testing the thermal fuse with a multimeter are both accessible DIY checks once the dryer is unplugged. If both look fine and clothes still aren’t drying with heat, the relay or control board is the likely cause — that’s a job for a technician working with live electrical components.
What Happens When You Call Star Appliance Repair
- Free service call with any completed repair — you’re never charged just to have us look
- Upfront price before any work begins, once the exact part is confirmed
- Most calls booked before noon get same-day service
- Manufacturer-approved parts, backed by our written warranty
Frequently Asked Questions
Will the dryer still tumble with E64 showing?
Often yes — the drum and motor are separate from the heating circuit, so you may notice clothes tumbling but coming out cold before the code even appears.
Is a heating element expensive to replace?
It’s a moderate repair — the part itself is reasonably priced, with labour depending on how accessible it is on your model.
Can I test the thermal fuse myself?
Yes, with a multimeter and the dryer unplugged — a straightforward continuity test.
Why did the thermal fuse blow in the first place?
Usually a restricted vent causing overheating, or a failing element drawing irregular current — worth checking both when replacing it.
*Same-day service is offered whenever possible and depends on technician availability, parts, and your location within the GTA.